CW6180
PERFORMANCE CHARACTERISTICS
This series of machine tools are universal type lathes, using a separated structure.suitable for high-speed steel and carbide steel cutting tolls for different materials of the shat parts,cylindrical and disk-shapedparts, turning outer circle, end face,grooving, cutting,boring holes and other processes. The bed has high rigidity,slide plate, knife holder,saddle and can move quickly addition.this series of machine tools has the characteristics of high rigidity,high efficiency safely reliability and easy operation etc.
PERFORMANCE CHARACTERISTICS
There is a safety mechanism in the sliding box to prevent the lathe from being damage due to overload. The upper tool post can be used to flexible turning short cone,long cones turning can be achieved by compound motions of longitudinal feed and upper tool post,high frequency quenching of the guide rails of the bed can increase the service life of the guide rails,lathe control handle concentrated, convenient and flexible for us.
CW6180
SPECIFICATIONS | Unit | CW6180Q |
ax.swing over bed | mm | Ф800 |
Max.turning diameter on the tool holder | mm | Ф480 |
Max.swing diameter over gap | mm | No gap |
Maximum length of the workpiece | mm | 1500,3000,5000,6000,8000,10000,12000,14000,16000,18000,20000 |
Spindle bore and nose head | mm | 105:A2-11 |
Spindle bore front taper and centre taper | mm | metric 120:Morse5 |
Spindle speed and range | r/min | 7.5-1000:18kinds |
Longitudinal feed quantities steps and range | mm/r | 64kinds:0.05-24.3 |
Range1 :1 | 0.1-1.52 | |
Range16 :1 | 1.6-24.3 | |
Trace feed range through using gear change | mm/r | 0.06-0.912 |
The ratio of transverse feeding and longitudinal feed | mm/r | 1/2 |
Rapid traverse speed of the saddle | mm/r | 4000 |
Machine screw pitch | mm | 12(Metric) 1/2″(inch) |
Metric thread species and scope | mm | 501-240 (another 14 non-standard threads With 14 non-standard threads) |
Inch thread species and scope | kinds/T.P.I | 26kinds:14-1 t.p.i |
Module thread species and range | kinds/rm | 53kinds;0.5-120 |
Diametral pitch screw species and scope | kinds /DP | 24kinds:28-1 DP |
Cross travel of lower knife rest | mm | 500 |
Cross travel of upper knife rest | mm | 200 |
Tailstock quill travel | Mm | 250 |
Tailstock quill taper | MT 6# | |
Main motor power | kw | 11 |
Rapid traverse motor | kw | 1.1 |
Coolant pump power | kw | 90 |
Guide way width | Mm | 550 |
Max .load capacity | kg | 2000 |