CW61125
PERFORMANCE CHARACTERISTICS
This series of machine tools are universal type lathes, using a separated structure.suitable for high-speed steel and carbide steel cutting tolls for different materials of the shat parts,cylindrical and disk-shapedparts, turning outer circle, end face,grooving, cutting,boring holes and other processes. The bed has high rigidity,slide plate, knife holder,saddle and can move quickly addition.this series of machine tools has the characteristics of high rigidity,high efficiency safely reliability and easy operation etc.
PERFORMANCE CHARACTERISTICS
There is a safety mechanism in the sliding box to prevent the lathe from being damage due to overload. The upper tool post can be used to flexible turning short cone,long cones turning can be achieved by compound motions of longitudinal feed and upper tool post,high frequency quenching of the guide rails of the bed can increase the service life of the guide rails,lathe control handle concentrated, convenient and flexible for us.
CW61125
|
SPECIFICATIONS |
Unit |
CW61125B |
|
Max .swing over bed |
mm |
1250 |
|
Max .turning diameter on the tool holder |
mm |
860 |
|
Maximum length of the workpiece |
mm |
1500/3000/5000/6000/8000/10000/12000/20000 |
|
Max.weight of work piece |
tone |
6 |
|
Guide way width |
mm |
755 |
|
Spindle bore |
mm |
130 |
|
Spindle taper bore |
kinds : r/min |
Metric 140 |
|
Spindle speed number and range |
kinds :r/min |
21 kinds:3.15-315(Foreward) 12kinds:3.5-278(Reversal) |
|
Longitudinal and cross feeds kinds range |
kinds : mm/min |
56 kinds;0.1-12/56kinds:0.05-6 |
|
Number and range of metric thread |
kinds :r/min |
44kinds:1-120 |
|
Number and range of inch thread |
kinds :r/min |
31kinds:24-1/4T.P.1 |
|
Number and range of module thread |
kinds :r/min |
45kinds;0.5-60 |
|
Number and range of diametrical pitch thread |
kinds :r/min |
38kinds:1/2-56Dp |
|
Max . lateral travel of the lower tool holder |
kw |
630 |
|
Max . travel of upper tool holder |
Mm |
300 |
|
Rapid traverse speed of tool holder longitudinal |
mm |
3740 |
|
Rapid traverse speed of tool holder transverse |
mm/min |
1870 |
|
Rapid traverse speed of top tool holder |
mm/min |
935 |
|
Tailstock quill diameter |
mm |
160 |
|
Tailstock quill travel |
mm |
300 |
|
Tailstock quill taper |
MT |
Metric80 |
|
Main motor power |
kw |
18,5,6级(Class) |
|
Rapid traverse motor power of tool holder |
Kw |
1.5 |
|
Coolant system motor power |
Kw |
0.12 |
|
Machine size (LxWxH) |
mm |
(L+3100)x2150x1825) |
|
Machine gross weight |
ton |
10500(1500mm) 12000(3000mm) 14500(5000mm) 8000(8000mm) |